Task: | Program |
---|---|
Structure: | Combination |
Mathematical Model: | Linear |
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Technical performance and structural features: This series of burner controllers is a program controller used for gas combustion, which detects flames through ionization. technical parameter Power supply: 220V 50/60Hz 220V 50/60Hz. Working temperature: -10 ºC~+60 ºC Protection level: IP40 Pre blowing time TV: 30S Safety time TS: 2S Extinguishing reaction time: less than 1 second Working power consumption: 7A Direct drive motor: 4A Control valves: 2 Secondary valve interval time: 30 seconds Direct drive igniter: 2A Direct drive alarm: 2A Small ionization current: 0.5 μ A Ionization current: 0.7 μ A Insurance: built-in Weight: 585g Connection: Base B or N, it is recommended to use M4 screws. There are two sizes available: standard and extended. Installation precautions: 1. Ensure that the installation of phase and zero lines is correct. 2. The controller operates in an intermittent control mode and needs to ensure a minimum of one shutdown within 24 hours. When installing the controller, it is necessary to ensure that the power is disconnected. 4. Normal temperature can extend the service life of the controller. 5. It should comply with local standards for electrical installation. 6. Controllers using DC power must pay attention to the correct installation of polarity. Before starting the system, it is necessary to check if the connection is correct. 8. Ensure good wiring. 9. Avoid connecting the Phototube cable to the power supply. |
Suppliers with verified business licenses