| Customization: | Available |
|---|---|
| Task: | Program |
| Structure: | Combination |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Siemens combustion programmable controller LMO14.111C2 A fuel burner based on microprocessor controlled intermittent forced ventilation operation. LMO.../LMO24... less than 30Kg/h. LMO... greater than 0Kg/h and used for fixed direct combustion air heaters. Installation precautions for Siemens combustion program controller LMO14.111C2: 1. The controller unit and other cables must be installed separately from the high-voltage ignition cable. 2. Do not confuse the phase line with the neutral line. 3. When installing switches, wires, grounding, etc., local rules must be followed. 4. It must be confirmed that the amount of current allowed by the terminal is not exceeded. 5. Do not connect the main power supply to the output terminal of the combustion controller. 6. Use an all pole switch to isolate the combustion controller from the mains power source, leaving at least 3mm contact gap. 7. Use a metric screw and loose washer to protect the grounding sleeve under the chassis. 8. Without using a fan, an AGK25 must be connected to terminal 3 of the controller, otherwise the burner cannot start reliably. For safety reasons, connect the neutral wire to the neutral distributor or terminal 2 at the bottom of the insertion block. The connection between the neutral wire and terminal 2 is pre wired at the bottom of the control unit. |
){kind=link}