Dungs Gas Solenoid Valve MB-Dle415 B01 S20 Burner Solenoid Valve

• Customization: Available
• Certification: ISO9001
• Type: Electric Coil
• Model NO.: MB-DLE415 B01 S20
• Material: Silicon Carbide
• Form: Squirrel-Cage Heating Element
• Shape: Tubular
• Flow Regulation: Hand Movement
• Guiding Materials: Adjusting The Housing Aluminum, Steel, Brass
• Transport Package: Regular Packing
• Specification: Actual prevail
• Trademark: DUNGS
• Origin: Germany
• Production Capacity: 9999
• Package Size: 6.00cm * 5.00cm * 6.00cm
• Package Gross Weight: 7.000kg

Product Description

Dungs solenoid valve MB-DLE 415 B01 S20 is a high-performance valve used in gas combustion equipment. The following is its related introduction:

Function and Application: This is a gas combination valve used for two-stage or smooth two-stage combustion, proportional adjustment burners. The gas valve group and burner comply with the EN 676 standard and are suitable for gas and other neutral gaseous media in the 1, 2, and 3 gas series. It can be widely used in shipbuilding, petrochemicals, power, machinery, medical, air conditioning, boilers, and other fields.
Structural features: It belongs to a compact design, integrating solenoid valves, filters, and regulators into one. Its structural dimensions are 415, corresponding to a rated width of DN40, and V2 is a double seat valve. Equipped with a sediment collector and filter, it can effectively filter impurities in the gas, ensure the cleanliness of the gas, and extend the service life of valves and the entire combustion system.
Technical parameters: The maximum working pressure can reach 360mbar, the output pressure range is 4mbar to 20mbar, and the pressure level is PN1. The applicable range of ambient temperature is -15 ºC to+70 ºC, but when used in liquefied gas equipment, it must not operate below 0 ºC and is only applicable to gaseous liquefied gas. The solenoid valve is driven by DC soleoid, with a protection level of IP54 and a weight of approximately 7.8kg. Valve V1 meets the requirements of DIN EN 161 Class A, Class 2, and can be quickly opened and closed; Valve V2 also meets the requirements of DIN EN 161 Class A, Class 2, with fast closing and opening functions and a main throttle. Its closing time is less than 1 second and opening time is less than 20 seconds, and the fast stroke is adjustable.
Installation and maintenance: During installation, the valve should be installed behind the indoor intake valve for maintenance purposes. It should be installed in the direction of airflow indicated on the valve body, and the valve body coil should not be inverted. Horizontal and vertical installation is allowed. The control wire of the solenoid valve should be connected correctly and reliably. The control wire has polarity, with the white wire being the positive pole and the black wire being the negative pole, and cannot be connected in reverse. In terms of maintenance, it is necessary to regularly check the sealing performance of valves, the wear and tear of components, etc. If problems are found, relevant components should be replaced or repaired in a timely manner to ensure the normal operation of valves and the safety of the system.