Type: | Sensor |
---|---|
Usage: | Temperature, Flame |
Certification: | CE, ISO, CCC |
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
C7027A Flame Detector Characteristics: C7027A must be compatible with Honeywell's corresponding combustion safety controller for application. (such as RA890G, FC1000A, EC7800 series controllers, etc.) Unless otherwise specified, they cannot be used in conjunction with other company products. C7027A should be installed at one end of the light guide tube outside the furnace. The connection method is% NPT threaded connection. The light guide tube should be installed with a downward tilt. If dust is prone to accumulate or the temperature is high, blowing and cooling air should be used. As shown in Figure 2. The light guide tube should be aimed at the bright areas in the middle and front of the flame. If it is a swirl or flameless burner, please pay special attention to the flame position aligned with the light guide tube. A shielded wire should be used to connect C7027A to the combustion safety controller, and the distance should not be too long (one<100 meters) FC1000A controller features: Power supply: Different models of controllers can be used for 115Vac or 230Vac, 50/60Hz AC power. Voltage range+10%~-15%. Honeywell UV Flame Detector C7035A1023 C7035A1031 C7035A1049 C7035A1064 C7035A1080 C7044A1006Honeywell C7027A/C7035A/C7044A UV flame detector is used in conjunction with Honeywell combustion safety controller for UV flame detection. C7035A1023, C7027A1049 Interface: 1/2 Suitable for: Honeywell combustion safety controllers BC1000, FC1000, RA890G matching |
Suppliers with verified business licenses